Innovative NiTi system
Easy, efficient and safe concept
 
4 instruments for all types of root canal
All instruments are used to full working length
Simultaneous shaping: every instrument shapes the whole length of the canal to the apex

Effective bacteria elimination: after using the second Mtwo® instrument irrigation cannula can already be brought to 3 mm before the apex
2 retreatment instruments with cutting tip for efficient removal of guttapercha fillings
All instruments are packed in sterile blisters for immediate use
 

Systematic procedure for successful results
No building of ledges: every instrument creates a glide path to the apex for the following instrument
No doubt how deep each instrument is used in the canal

 
 
 

Outstanding cutting efficiency
Mtwo® instruments are particularly flexible and efficient due to the combination of an S-shaped cross-section and deep cutting blades
Maximum space for removal of dentinal debris and minimum radial canal wall contact for a safe and fast preparation
The distance between the cutting blades increases from the instrument tip to the shaft: the pitch is progressive.The space for dentin removal is deeper at the back of the blade. This reduces the risk of blockage and the accumulation of dentin chips
The cutting blades form long, almost vertical spirals ensuring better control of instrument progression

Unique instruments
10/.04 and 15/.05 instruments, which facilitate initial shaping of the whole length of the root canal
Instruments with a 16 mm and a 21 mm working part. By using a passive filing motion interferences in the pulp chamber can be removed with a 21 mm working part instrument, without unnecessarily weakening the tooth

 

Optimal shaping for all obturation techniques
Further instruments are available
- for an apical diameter larger than
  0.25 mm (ISO 25)
- for optimal shaping for vertical condensation
Mtwo® alpha guttapercha for a perfect fit

Practical alternative to a motor:
Mtwo® direct
Torque settings for all Mtwo® instruments
90° retro-rotation when set torque limit is reached
 
Range of products
 
Arbeitsteil 16mm    
Mtwo® working part 16 mm   set of 6
Size/Taper   21 mm 25 mm
10/.04 234 021 010 234 025 010
15/.05 235 021 015 235 025 015
20/.06 236 021 020 236 025 020
25/.06 236 021 025 236 025 025
30/.05 235 021 030 235 025 030
35/.04 234 021 035 234 025 035
40/.04 234 021 040 234 025 040
25/.07 237 021 025 237 025 025
2x 10/.04, 15/.05, 20/.06   230 021 456 230 025 456
2x 25/.06, 1x 30/.05, 35/.04, 40/.04, 25/.07   230 021 457 230 025 457
 
Arbeitsteil 16mm    
Mtwo® working part 21 mm   set of 6
Size/Taper   25 mm 31 mm
10/.04 1234 025 010 1234 031 010
15/.05 1235 025 015 1235 031 015
20/.06 1236 025 020 1236 031 020
25/.06 1236 025 025 1236 031 025
30/.05   1235 031 030
35/.04   1234 031 035
40/.04   1234 031 040
2x 10/.04, 15/.05, 20/.06   1230 025 456  
2x 25/.06, 16mm WP: 1x 30/.05, 35/.04, 40/.04, 25/.07
   1230 025 457  
 
Mtwo® Retreatment files   set of 6
Size/Taper   21 mm  
15/.05 0232 021 015  
25/.05 0232 021 025  
3x 15/.05, 3x 25/.05   0232 021 202  
       
  Mtwo® Guttapercha   set of 60
Size   28 mm  
25/.06 220 628 025  
30/.05 220 528 030  
35/.04 220 428 035  
40/.04 220 428 040  
25/.07 220 728 025  
Assorted 2 x 25/.06, 1x 30/.05, 35/.04,40/.04, 25/.07   220 028 457  

 

 

    
Ref. 0238 025 000 Mtwo® BasicKit
1 blister Ref. 1230 025 456
1 blister Ref. 1230 025 457
3 plastic training blocks
CD-ROM
Ref. 1030 Mtwo® StarterKit
with Mtwo® BasicKit
2 x 3ml FileCare®EDTA
Mtwo® SystemBox
Instructions for use
Ref. 1046 000 000 Mtwo® Assistant, organizer empty
Ref. 1046 000 514

Mtwo® Assistant, organizer assorted:
  1 set Mtwo® per size in 25 mm
WP 21 mm:
10/.04, 15/.05, 20/.06, 25/.06
WP 16 mm:
30/.05, 35/.04, 40/.04, 25/.07
  1 set C-PILOT files per size in 25 mm ISO 06, 08, 10, 12,5 and 15
  1 set Mtwo® guttapercha points, assorted 25/.06, 30/.05, 35/.04, 40/.04, 25/.07
  1 sheet Control Stickers
Ref. 1046 000 614 Mtwo® Assistant, organizer complete:
 all Mtwo® instruments with working part 16 mm remaining contents see above (Mtwo® Assistant #514)
Ref. 0239 Mtwo® SystemBox
with Modul for easy organization and storage of Mtwo® instruments without instruments, autoclavable
Ref. 0491 Mtwo® Control Sticker
Ref. 1035 Mtwo® direct
torque-controlled contra-angle
« Back To Product List »
VDW GmbH · P.O. Box 830954 · D-81709 Munich, Germany
Tel.: +49 (0) 89 62 73 40 · Fax: +49 (0) 89 62 73 41 90 · e-Mail: info@vdw-dental.com