DT Post System
For a high quality and minimally
invasive restoration with fibre posts

The DT Post System

Optimal design and material for a minimally invasive treatment and a long lasting restoration
   
Optimal mechanical properties   Best possible post adaptation to canal
     

"The DT POST demonstrated optimal fit to the morphology of canals prepared by the most widely-used endodontic techniques in 90% of cases. We have carried out in vitro evaluation between morphological congruity of the site preparation and the DT POST; the cement thickness is never greater than 500 microns at any point of post circumference."

Scotti,R., Malferrari, S.Prosthetic aspects of endodontically treated tooth restoration. Proceedings from the 5th International Symposium. 27-33, 2001.
High flexural strength
Elasticity modulus similar to dentin
High fatigue resistance


Grandini, S., Goracci, C., Monticelli, F., Borraccini, A., Ferrari, M. An evaluation, using a ”three-point bending” test, of the fatigue resistance of certain fiber posts. II Dentista Modemo, March 2004
Correspondence between sizes of the
post and the canal to be restored		    
   

Indications*
 In case of insufficient residual tooth substance (more than one missing coronal wall), a post is needed to support the coronal restoration.

* Effect of Post Retained Composite Restorations on the Fracture Resistance of Endodontically-Treated Teeth Related to the Amount of Coronal Residual Structure. Roberto Sorrentino, Francesca Monticelli,Cecilia Goracci, Fernando Zarone, Franklyn R Tay, Marco Ferrari

  
 
 
more details »
 
Shorter procedure and long-lasting adhesion
 

Unique and Innovative Safety Lock Coating:

Shorter and easier procedure*:
no need to prime or silane the post
Long-lasting adhesion post/cement**:
 the coating made of silicate and silane ensures a high bonding strength. A patented protective layer ensures that the coating is not contaminated or deactivated.
In addition to all the DT Light Post® advantages

* Edelhoff,D.,Marx,R.
Evaluation of clinical time expenditure for adhesive restoration with FRC Posts, type DT Light using three different pretreatment methods
** Marx,R.
Evaluation of bonding strength of coated and uncoated posts
 
DT White Post®   DT Light Post®
     

Value for Money Fiber Post without
compromising on quality

Aesthetic white

Safe & Efficient:
high mechanical properties and fatigue resistance
Affordable price
Clinical procedure:
self-cure technique 
 

Recognized as best product

Since 2000 in the market,1 million posts sold worldwide. Numerous studies published with positive results
Recognized as high quality fibre posts by many international key opinion leaders
Aesthetic and radiopaque
Clinical procedure :self-or dual-cure technique
     
  Metal post Cast post Fibre post
 Risk of fracture high high low
 Risk of Contamination low high low
 Aesthetics low low high
 Removal difficult difficult easy

 

 

Clinical procedure: DT Light Post®, DT Light SL, DT White Post®
 

Remove obturation with DT Universal drill

 Shape the canal with DT Finishing drill. This step
is not necessary for size 0.		 Remove the coloured
ring from the post. Check seat of the post. Cut the post with diamond disc. Clean post with alcohol.		 Etch for 15 sec. Rinse for 10 sec. Dry with paper points. Leave surface moist. Prepare the dual cure or self cure primer. Apply 2 coats in canal. Leave for 20 sec. Remove excess. Gently air dry for 5 sec.
         
Apply silane and primer to the post. Air dry. Light-cure for 10-20 sec.
DT Light SL: Please do not apply this step. 		Apply self-or dual-cure cement in canal. For DT White Post®, use self cure cement only.

Place the post. Remove excess. For DT Light
Post® and DT Light SL, light-cure for 40 to 60 sec. For DT White Post®, wait till cement is set.

Apply 2 coats of primer. Wait for 20 sec. Remove excess. Light-cure for 30 sec. DT Light SL: Not necessary if dentin has been primed coronally and post was shortened for more than 5mm.

 Proceed with the core build-up.
 

Please refer to the instructions for use for more details
DT Light SL    

Comfort Class

  

 
     
Ref. 1930 000 000
DT Light SL Basic Kit

1 mixed Blister à 6 DT Light SL, 3 x #0, 3 x #1,
1 mixed Blister à 6 DT Light SL, 3 x #2, 3 x #3
1 DT Universal Drill (DT Finishing Drill size 0)
1 DT Finishing Drill #1,2,3

DT Light SL Refill Blister à 6 posts
Size 0 Ref. 1931 000 000
Size 1 Ref. 1931 000 001
Size 2 Ref. 1931 000 002
Size 3 Ref. 1931 000 003
     
DT Light Post®    

Standard Class

  

 
     
Ref. 0931 000
DT Light Post® Basic Kit

3 posts each, size 0, 1, 2, 3.
1 DT Universal Drill, 1 DT Finishing Drill per size
DT Light Post® Refill 6 posts: Size 0 Ref. 0931100, Size 1 Ref. 0931001
Size 2 Ref. 0931002, Size 3 Ref. 0931003
     
DT White Post®    

Economy Class

  

 
     
Ref. 0941 000
DT White Post® Basic Kit

6 posts #1, 3 posts #2, 3 posts #3,
1 DT Universal Drill, 1 DT Finishing Drill per size
DT White Post® Refill 6 posts: Size 1 Ref. 0941001, Size 2 Ref. 0941002
Size 3 Ref. 0941003
     
Accessories    

Comfort Class

  

 
     
Ref. 0935 000 2 DT Universal Drill (DT Finishing Drill size 0)
Ref. 0935 001/2/3 2 DT Finishing Drill #1/ 2/ 3
Ref. 0936 000 50 Composibrush
   
Ref. 0938 001
DT Post Removal Kit
NEW		 For removing posts
(DT Light Post®, DT Light SL, DT White Post®)
1 DT Pilot Drill, 1 DT Carbide Drill
     
« Back To Product list »
VDW GmbH · P.O. Box 830954 · D-81709 Munich, Germany
Tel.: +49 (0) 89 62 73 40 · Fax: +49 (0) 89 62 73 41 90 · e-Mail: info@vdw-dental.com